Digital Rear View Mirror
Digital Rear View Mirror
WARNING: The digital display has a limited field of view. Portions of the road, vehicles and other objects may not be visible. Take care when backing-up to be fully aware of your surroundings.
The rear view mirror can be set between a standard rear view mirror and a digital display that uses the vehicle’s camera system.
Note: The digital display is not as effective as the mirror view when driving at nighttime or in low light conditions.
Manually adjust the position of the rear view mirror for the desired view behind.
The rear view mirror automatically dims in proportion to the level of glare detected from a following vehicle’s headlights.
Note: This feature is disabled when the vehicle is in R (Reverse) to provide an unimpeded view in reverse.
Switching mirror views
Flip back the lever on the bottom of the mirror to use the standard mirror. Flip forward to activate the digital camera display.
Using digital mirror controls
Use the buttons at the base of the mirror to adjust the digital display.
-
Menu button - press to cycle through the possible adjustment modes:
-
Brightness
-
Roll
-
Tilt
-
Pan
-
Zoom
-
-
With an adjustment selected, the button performs as follows:
-
Brightness: Up
-
Roll: Left
-
Tilt: Up
-
Pan: Left
-
Zoom: In
-
-
With an adjustment selected, the button performs as follows:
-
Brightness: Down
-
Roll: Right
-
Tilt: Down
-
Pan: Right
-
Zoom: Out
-
WARNING: Intense light sources shining on the display surface reduce the display contrast, making it harder to view objects on the display.