Setting Battery Saver
Setting Battery Saver
CAUTION: Charging beyond the recommended level too often can cause battery pack degradation.
At times, you may need to adjust the charge limit higher or lower according to your driving needs. A higher charge limit can be set to increase trip distance. Vehicles that are parked for extended periods should use a lower charge limit to maintain battery pack health.
To set a charge limit, select > Charge.
-
Battery Saver: Use the + and - buttons to adjust the charge level.
Note: To extend battery life, Fisker recommends setting a charge level of 80% for daily usage.
-
Max Charging Current: Use the + and - buttons to adjust the maximum amperage drawn by the charging system.
Note: This setting only applies to AC charging.
Note: Adjust this setting if you are concerned about overloading a shared domestic wiring circuit.
For additional charging options, swipe left on the Charge screen.
-
Off-Peak Charging: To prioritize charging times and reduce energy costs, press to turn this setting On, then use the Set Time buttons to set your starting and ending charging times.
-
Minimum Charge: To charge to a set minimum when the charge cable is connected, turn this setting On and select a percentage.
Note: This setting can be used when storing your vehicle for extended periods. See Storage Guidelines.