Opening and Closing Windows
Opening and Closing Windows
The power windows can be operated when the vehicle is powered On.
The driver’s door window switches control all windows in the vehicle. Pull up or press down on a switch to raise or lower the associated window.
-
To automatically lower or raise a window fully, push or pull the switch past the resistance point and then release it.
Pushing or pulling the switch again will stop the motion.
-
To partially lower or raise a window, gently push or pull the switch up to the resistance point. Release when the desired position is reached.
Each passenger door contains a window switch for its associated window.
Note: The windows automatically stop closing and open slightly if an obstruction is detected.
Inhibiting rear window operation
WARNING: Whenever children are seated in the rear seats, the window locks should be activated for their safety. There is a risk of death or serious injury if a child operates the rear windows.
WARNING: Never leave children unsupervised in a vehicle.
The rear windows can be operated from the switches on the rear doors when the window lock has not been activated.
To prevent passengers from operating the rear window switches, the window lock feature can be activated from the switch panel on the driver’s door.
Press the rear window lock button to activate or deactivate this feature.
Note: The indicator on the switch illuminates when the rear window switches are deactivated.